The PetJet Outdoor Home Wall Hot Shower

Important: We have sold out more than 3 times during this busy period recently. So there is a slight delay in orders going out of our farm's warehouse!

Free UK delivery on orders above £50. £3.49 for orders under £50.

UK: 5-7 days

USA/CAN/AUS: 7-10 days

EU: 3-5 days

ROW: 5-7 days

Klarna, Clearpay, Apply Pay & Google Pay are available alternative methods at checkout.

Tap Jet to Cart to go to checkout.

• Home Wall Shower Panel
• Silver Shower Hose
• Wall Mounted Hook For Holding The Shower Head
• Temperature Control Dial
• Free Massage Shower Head

Tap 'Jet To Cart' or go to our parts & extras to add the installation fittings pack.

Step-by-Step Installation Guide for the Home Shower Unit. DIY Expert Or Plumber Recommended. 30 minute Quick job.

1. Mark and Drill hole for Pipes

1. Measure and mark the 15mm pipe centres for the copper pipes on the wall.
2. Using a 19mm drill bit, drill holes at the marked positions.

2. Core Drill for Shower Unit Placement

1. Locate the area between the drilled holes.
2. Core cut the brick using a 91mm diamond core drill bit to allow the shower unit to sit flush against the wall.

3. Attach Connections to the Unit

1. Connect one of the following to the brass fitting on the home shower unit:

• 1/2” flexi pipe
• Flomasta Copper End Feed Straight Tap Connector (15mm x 1/2")
• Flomasta Brass Compression Adapting Female Coupler (15mm x 1/2")

1. Ensure all 1/2" threaded connections are securely wrapped with PTFE tape (or equivalent) before attaching.

4. Insert Pipe for Wall Penetration

1. If using a 1/2” to 15mm connection, insert a 15mm pipe long enough to penetrate through the wall into the property's interior.
2. Recommendation: The connections should enter under the kitchen sink and be directly linked to the 15mm hot and cold tap feed.

5. Mount the Shower Unit

1. Mark the positions for the fixing holes on the wall.
2. Drill the fixing holes at the marked points.
3. Securely mount the shower unit using the supplied Rawlplugs and screws.

6. Connect to Hot and Cold Feed

1. Under the sink, connect the 15mm copper pipe or flexi pipe to the hot and cold water feed.

• Anyone with good DIY skills can install. If you don't know a DIY person or aren't one yourself - your local plumber could cost between 50-100 pounds an hour.

• It takes just 30 minutes and you'll have your new sleek home shower fitted ready to go! For a lifetime of convenience and excellent ease of use experience.

• You can install it directly outside from under any sink inside! Maybe a utility room, kitchen, garage, tack room, stable, kennels.

• It can connect to a garden hose pipe with a 3/4 female fitting attachment.

• It's super easy to install for a DIY person or plumber.

• Left and right turn toggle and temperature controlled safety—no connector, no flow

• High flow rate for fast, thorough cleaning

• Swivel shower head with fixed spray and lever control

• 1.5m hose—durable, flexible, and built to last.

• Compact & stylish—blends into any outdoor setup

• Perfect for pets, boots, or garden gear—no more muddy chaos indoors